Phase Change Materials (PCM) Market 2018 By Manufacturers, Regions, Type And Application, Forecast To 2023
Phase change materials (PCMs) are substances with a high enthalpy of fusion, also known as latent heat, meaning they can store large quantities of heat energy as they change phase. When melting, they absorb heat and maintain the temperature of the environ
(EMAILWIRE.COM, October 16, 2018 )
Phase change materials (PCMs) are substances with a high enthalpy of fusion, also known as latent heat, meaning they can store large quantities of heat energy as they change phase. When melting, they absorb heat and maintain the temperature of the environment at a certain value until completely molten. When the temperature of the environment falls below the crystallisation temperature, the PCM will start to solidify, releasing large quantities of heat and maintaining the temperature until completely solid.
Latent heat storage can be achieved through liquid–>solid, solid–>liquid, solid–>gas and liquid–>gas phase changes. However, only solid–>liquid and liquid–>solid phase changes are practical for PCMs. Although liquid–gas transitions have a higher heat of transformation than solid–liquid transitions, liquid->gas phase changes are impractical for thermal storage because large volumes or high pressures are required to store the materials in their gas phase. Solid–solid phase changes are typically very slow and have a relatively low heat of transformation.
Pdf Of This Report : https://www.reportsandmarkets.com/report-info.pdf?report_id=2474342report_id=2474342
Phase change materials are products that release or absorb heat when they change from one phase to another (usually from solid to liquid or vice versa). These materials store thermal energy in the form of latent heat, which is released when they freeze or crystallize and absorbed when they melt at their respective melting/freezing temperature points. Hence, they are used in a broad range of applications that require thermal control and management.
Scope of the Report:
This report focuses on the Phase Change Materials (PCM) in global market, especially in North America, Europe and Asia-Pacific, South America, Middle East and Africa. This report categorizes the market based on manufacturers, regions, type and application.
Currently, The industry concentration is not high, the technical barriers and financial barriers of Advanced Phase Change Materials (PCM) are also not high. The companies in the world that produce Advanced Phase Change Materials (PCM) mainly concentrate in China, India, Southeast Asia, Europe, Japan and USA. Raw materials are also concentrated in these regions.
The worldwide market for Phase Change Materials (PCM) is expected to grow at a CAGR of roughly xx% over the next five years, will reach xx million US$ in 2023, from xx million US$ in 2017,
Market Segment by Manufacturers, this report covers
BASF
Honeywell
Cryopak
Entropy Solutions
Climator Sweden
Phase Change Energy Solutions
Outlast Technologies
Dow Building Solutions
Chemours Company
PCM Energy
Rubitherm Technologies
Request For Sample : https://www.reportsandmarkets.com/sample-request/global-phase-change-materials-pcm-market-2018-by-manufacturers-regions-type-and-application-forecast-to-2023-one
Market Segment by Regions, regional analysis covers
North America (United States, Canada and Mexico)
Europe (Germany, France, UK, Russia and Italy)
Asia-Pacific (China, Japan, Korea, India and Southeast Asia)
South America (Brazil, Argentina, Colombia etc.)
Middle East and Africa (Saudi Arabia, UAE, Egypt, Nigeria and South Africa)
Market Segment by Type, covers
Organic
Inorganic
Bio-based
Make an enquiry before buying this Report : https://www.reportsandmarkets.com/enquiry/global-phase-change-materials-pcm-market-2018-by-manufacturers-regions-type-and-application-forecast-to-2023-one
Market Segment by Applications, can be divided into
Building & Construction
Refrigeration
Consumer Goods
Others
Buy Report : https://www.reportsandmarkets.com/checkout?currency=one_user-USD&report_id=2474342
There are 15 Chapters to deeply display the global Phase Change Materials (PCM) market.
Chapter 1, to describe Phase Change Materials (PCM) Introduction, product scope, market overview, market opportunities, market risk, market driving force;
Chapter 2, to analyze the top manufacturers of Phase Change Materials (PCM), with sales, revenue, and price of Phase Change Materials (PCM), in 2016 and 2017;
Chapter 3, to display the competitive situation among the top manufacturers, with sales, revenue and market share in 2016 and 2017;
Chapter 4, to show the global market by regions, with sales, revenue and market share of Phase Change Materials (PCM), for each region, from 2013 to 2018;
Chapter 5, 6, 7, 8 and 9, to analyze the market by countries, by type, by application and by manufacturers, with sales, revenue and market share by key countries in these regions;
Chapter 10 and 11, to show the market by type and application, with sales market share and growth rate by type, application, from 2013 to 2018;
Chapter 12, Phase Change Materials (PCM) market forecast, by regions, type and application, with sales and revenue, from 2018 to 2023;
Chapter 13, 14 and 15, to describe Phase Change Materials (PCM) sales channel, distributors, traders, dealers, Research Findings and Conclusion, appendix and data source
Contact Us
Sanjay Jain
Manager - Partner Relations & International Marketing
www.reportsandmarkets.com
info@reportsandmarkets.com
Ph: +44-020-3286-9338 (UK)
Ph: +1-214-736-7666 (US)
Ph: +91-703-049-0292 (IND)
Phase change materials (PCMs) are substances with a high enthalpy of fusion, also known as latent heat, meaning they can store large quantities of heat energy as they change phase. When melting, they absorb heat and maintain the temperature of the environment at a certain value until completely molten. When the temperature of the environment falls below the crystallisation temperature, the PCM will start to solidify, releasing large quantities of heat and maintaining the temperature until completely solid.
Latent heat storage can be achieved through liquid–>solid, solid–>liquid, solid–>gas and liquid–>gas phase changes. However, only solid–>liquid and liquid–>solid phase changes are practical for PCMs. Although liquid–gas transitions have a higher heat of transformation than solid–liquid transitions, liquid->gas phase changes are impractical for thermal storage because large volumes or high pressures are required to store the materials in their gas phase. Solid–solid phase changes are typically very slow and have a relatively low heat of transformation.
Pdf Of This Report : https://www.reportsandmarkets.com/report-info.pdf?report_id=2474342report_id=2474342
Phase change materials are products that release or absorb heat when they change from one phase to another (usually from solid to liquid or vice versa). These materials store thermal energy in the form of latent heat, which is released when they freeze or crystallize and absorbed when they melt at their respective melting/freezing temperature points. Hence, they are used in a broad range of applications that require thermal control and management.
Scope of the Report:
This report focuses on the Phase Change Materials (PCM) in global market, especially in North America, Europe and Asia-Pacific, South America, Middle East and Africa. This report categorizes the market based on manufacturers, regions, type and application.
Currently, The industry concentration is not high, the technical barriers and financial barriers of Advanced Phase Change Materials (PCM) are also not high. The companies in the world that produce Advanced Phase Change Materials (PCM) mainly concentrate in China, India, Southeast Asia, Europe, Japan and USA. Raw materials are also concentrated in these regions.
The worldwide market for Phase Change Materials (PCM) is expected to grow at a CAGR of roughly xx% over the next five years, will reach xx million US$ in 2023, from xx million US$ in 2017,
Market Segment by Manufacturers, this report covers
BASF
Honeywell
Cryopak
Entropy Solutions
Climator Sweden
Phase Change Energy Solutions
Outlast Technologies
Dow Building Solutions
Chemours Company
PCM Energy
Rubitherm Technologies
Request For Sample : https://www.reportsandmarkets.com/sample-request/global-phase-change-materials-pcm-market-2018-by-manufacturers-regions-type-and-application-forecast-to-2023-one
Market Segment by Regions, regional analysis covers
North America (United States, Canada and Mexico)
Europe (Germany, France, UK, Russia and Italy)
Asia-Pacific (China, Japan, Korea, India and Southeast Asia)
South America (Brazil, Argentina, Colombia etc.)
Middle East and Africa (Saudi Arabia, UAE, Egypt, Nigeria and South Africa)
Market Segment by Type, covers
Organic
Inorganic
Bio-based
Make an enquiry before buying this Report : https://www.reportsandmarkets.com/enquiry/global-phase-change-materials-pcm-market-2018-by-manufacturers-regions-type-and-application-forecast-to-2023-one
Market Segment by Applications, can be divided into
Building & Construction
Refrigeration
Consumer Goods
Others
Buy Report : https://www.reportsandmarkets.com/checkout?currency=one_user-USD&report_id=2474342
There are 15 Chapters to deeply display the global Phase Change Materials (PCM) market.
Chapter 1, to describe Phase Change Materials (PCM) Introduction, product scope, market overview, market opportunities, market risk, market driving force;
Chapter 2, to analyze the top manufacturers of Phase Change Materials (PCM), with sales, revenue, and price of Phase Change Materials (PCM), in 2016 and 2017;
Chapter 3, to display the competitive situation among the top manufacturers, with sales, revenue and market share in 2016 and 2017;
Chapter 4, to show the global market by regions, with sales, revenue and market share of Phase Change Materials (PCM), for each region, from 2013 to 2018;
Chapter 5, 6, 7, 8 and 9, to analyze the market by countries, by type, by application and by manufacturers, with sales, revenue and market share by key countries in these regions;
Chapter 10 and 11, to show the market by type and application, with sales market share and growth rate by type, application, from 2013 to 2018;
Chapter 12, Phase Change Materials (PCM) market forecast, by regions, type and application, with sales and revenue, from 2018 to 2023;
Chapter 13, 14 and 15, to describe Phase Change Materials (PCM) sales channel, distributors, traders, dealers, Research Findings and Conclusion, appendix and data source
Contact Us
Sanjay Jain
Manager - Partner Relations & International Marketing
www.reportsandmarkets.com
info@reportsandmarkets.com
Ph: +44-020-3286-9338 (UK)
Ph: +1-214-736-7666 (US)
Ph: +91-703-049-0292 (IND)
Contact Information:
Reports And Markets
Sanjay jain
Tel: 12143771121
Email us
----
This press release is posted on EmailWire.com -- a global newswire that provides Press Release Distribution Services with Guaranteed Results
Reports And Markets
Sanjay jain
Tel: 12143771121
Email us
----
This press release is posted on EmailWire.com -- a global newswire that provides Press Release Distribution Services with Guaranteed Results