Want To Make A Hollow Ice Ball To Fill With Cocktail?
Cold Drinks On Steroids Is The New Technology Of Mixology. Taking A Round Ice Mold And Turning It Into Detailed Cooling Monster.
The top product for a better price with an owner who watches all his customers needs. Amazon has it now on sale for a very limited time. My customers are repeat buyers and now they have a lower price as well.
Hollow Beverage Ice Ball Directions
Busting Mixed Drink Sphere
Ice round drink tools
- 2.5 inch Round Ice Molds
- Sizable Syringe with Needle
- Freezer (on the coldest settings).
Mixed drink ingredients (or your desired mixed drink).
1 oz Vodka
1/2 oz Triple sec
1/2 oz Lime juice (Rose's)
1/2 oz Cranberry juice Lime wedge
Ice Sphere procedures.
1- Supply the round ice mold bottom with your drinking water right up to the highest fill line.
2- Pop on the ice mold caps.
3- Put the whole ice mold on a shelf in the coldest location of your freezer. Adhere to all these guidelines to get an ice sphere wall surface which has uniform thickness all over.
- The coldest place in an upright freezer is generally the bottom.
- Place the ice mold on a small wire rack on the bottom of your freezer for air circulation.
- If using 2 or more ice molds, keep a gap all around them for frosty air to get around and do not stack them.
- Do not have a lot of things not frozen already and do not open up the door repeatedly. Help keep it as cold as you can at all times.
- Turn mold upside-down midway thru the freezing procedure.
4- Optimum time to have an even ice wall thickness of around 1/4 inch in many fridge freezers may take roughly 2 and 3 hrs.
5- Pull out the mold from the freezer and using your fingers take out the frozen water that got out from the top opening of the mold.
6- Put the mold under cool faucet water for 30 secs so you can take off the silicone top freely. You may use tepid water but beware because if it is too hot it will split the ice. Keep the ice ball on its base, just take off the top.
7- Using a syringe with a long needle (2" or more) make a hole in the sphere by turning the needle right and left. You can also drill it.
Next, using the syringe, draw all the water from within the hollow ice ball. If the needle is not long enough to reach the base, just turn the sphere inverted and withdraw the needle till it is near to the hole and you will be able to eliminate all the water.
8-Using your hands, take out the empty sphere from the base of the mold and save it in the freezer until needed.
Sphere Filling - Blend all the mixed drink ingredients and shake them with ice cubes till they are truly cold. Or it will fracture the ice and the hollow sphere will begin spilling.
2- Take out the hollow sphere from the freezer. The tiny hole you made may be shut so you'll need to reopen it with the needle or drill.
3- Little by little fill the hollow sphere with the chilled mixed drink using the syringe.
4- Meticulously put the sphere in an old fashioned glass. Try not to drop it in the glass or it may split and begin leaking. You could hold the glass sideways with one hand, with the bottom slightly up (tilt the glass). With the other hand, slide the ice sphere against the side of the glass until it hits the bottom and then turn the glass up again. There is no need to seal the hole if it is small enough. The liquid won't come out as air can't get in at the same time.
5- If desired, add a lime wedge or an orange to the glass.
6- Provide the drinker with a 8" muddler or small hammer to smash open the ice ball. Be careful not to break the glass!
About Ice Sphere Tech
Ice Sphere Tech is a small company that manufacturers Ice ball molds. High customer support with the trust of Amazon behind us.
Ice Sphere Tech
This is a press release. Press release distribution and press release services by EmailWire.Com: http://www.emailwire.com/us-press-release-distribution.php.