Wind Turbine Casting Market Size, Share and Forecast 2026
The global wind turbine casting market size was worth USD XX billion in 2018 and is forecasted to reach USD XX billion by 2026, at a CAGR of XX% during the forecast period.
(EMAILWIRE.COM, September 12, 2019 ) Market Overview
• Wind energy which utilizes kinetic energy from the wind and converts it into electrical power is one strong alternative to conventional energy sources. Rising environmental harm caused by alternate energy sources is gaining awareness across the end-users. As a result, heavy investments are being put into the new energy sources which are eco-friendly. Wind turbines are designed for a calculated lifespan of 20 years, which means that ideally, the machine is supposed to work without interruption throughout these 20 years.
• As per Federal and State regulations in the US, Wind Turbines shall comply with all applicable local, state, and federal requirements, not limited to all applicable electrical, construction, noise, safety, environmental and communications and requirements.
Market Dynamics
• Growing installations of wind energy plants combined with the rapid reduction of fossil fuels will drive the demand for wind turbines, which will increase the demand for wind turbine casting market. Adding to this, Increase in spending on energy from government and increasing demand for electricity are the major drivers for the market growth globally.
• Favorable government policies like promoting the usage of renewable energy sources and the need for lowering carbon footprints and emissions are increasing worldwide.
• Huge investment is required for the manufacturing and installation of wind turbines is the major restraint hampering the growth of the market. Adding to this, the rising demand for energy from the Solar sector is the other significant factor hindering the market growth. Solar energy utilization rate has witnessed substantial growth over the past few years emerging as a potential threat to wind energy source.
Market Segmentation
• Based on the type, the wind turbine casting market is segmented into the horizontal axis and vertical axis. Horizontal axis wind turbines are the most common type of use worldwide. Horizontal axis turbine dominates the majority of the wind industry and expected to continue the same in the forecast period due to high efficiency and power output compared to Vertical axis type turbines. Companies are focusing to produce a different type of ranges in power for the horizontal axis. For instance, Aeolos Wind Energy produces 1kw, 2kw, 3kw, 5kw, 10kw, 20kw, 30kw, 50kw horizontal axis wind turbines. Company has launched Aeolos-H 30kw – Permanent Magnet & Gearless Wind Turbine System in July 2017.
• On the basis of application, wind turbine casting is segmented into onshore, offshore type and other. The offshore application is anticipated to emerge as the next fastest-growing segment owing to rising government supports and ambitious targets to developing the wind farms in the water bodies. The growing number of installations in offshore applications in countries, such as China, Japan, Germany, UK, Denmark, and the Netherlands is projected to drive market growth. For instance, There are currently c.5-6GW of offshore wind in the UK by 2019, with a further 4-5GW having secured development contracts.
• Most of the Companies are focusing to manufacture offshore wind turbines worldwide. For instance, In July 2019, General Electric finished manufacturing the first nacelle for its new 12-megawatt offshore wind turbine, known as the Haliade-X, as the company pushes to establish itself as an offshore market rival to Siemens Gamesa and MHI Vestas.
Geographical Analysis
• Global wind turbine castings market is segmented into five major regions including North America, Europe, Asia Pacific, South America, and the Middle East & Africa region. Asia Pacific is anticipated to be the largest market share owing to the growing demand for electricity due to rapid industrialization and urbanization in the region during the forecasted period. Moreover, the growing requirement of energy concerning population expansion is anticipated to fuel growth in the region.
• This region is anticipated to foresee the next highest significant growth owing to stringent environmental norms to reduce carbon footprints in the region. Also, the growing offshore installations, especially in countries such as the UK, Germany, Spain, Scotland and Sweden are expected to increase demand over the forecast period. For instance, In 2019, Scotland government has installed the biggest offshore wind farm and this is the fourth-largest wind farm on the planet.
Competitive Analysis
• Global wind turbine casting market is facing high competition within the industry as the companies are innovating their wind turbine technology to increase their efficiency. Some of the major players include Siemens Gamesa Renewable Energy, S.A., SEForge, Aeolos Wind Energy Limited, Vestas Wind Systems A/S, Sawtenergy, Goldwind, Enercon, Suzlon Energy Ltd, Global Spec, WIndside Production Ltd and MFG Wind.
• Global wind turbine casting market competitiveness is enhancing with the rising installations of new wind turbine power plants globally.
• For instance, on February 2019, Wind turbine maker Siemens Gamesa signed a USD 78.4 million contract with EPBiH to supply wind turbines for a 48-megawatt (MW) wind farm. Further, the company will supply 15 turbines and would build a wind park on Podvelezje plateau near the southern town of Mostar. It will also service the turbines for five years.
• February 2019, Siemens GA completed the casting the initial turbine blades for the second phase of the 120MW Formosa 1 phase 2 project located Taiwan off the coast In.
View full sample report: https://www.datamintelligence.com/research-report/wind-turbine-casting-market
Download free sample: https://www.datamintelligence.com/download-sample/wind-turbine-casting-market
About Us
DataM Intelligence was incorporated in the early weeks of 2017 as a Market Research and Consulting firm with just two people on board. Within a span of less than a year we have secured more than 100 unique customers from established organizations all over the world.
For more information:
Sai Kiran
Sales Manager at Data M Intelligence
Email: info@datamintelligence.com
Tel: +1 877 441 4866
Website: www.datamintelligence.com
• Wind energy which utilizes kinetic energy from the wind and converts it into electrical power is one strong alternative to conventional energy sources. Rising environmental harm caused by alternate energy sources is gaining awareness across the end-users. As a result, heavy investments are being put into the new energy sources which are eco-friendly. Wind turbines are designed for a calculated lifespan of 20 years, which means that ideally, the machine is supposed to work without interruption throughout these 20 years.
• As per Federal and State regulations in the US, Wind Turbines shall comply with all applicable local, state, and federal requirements, not limited to all applicable electrical, construction, noise, safety, environmental and communications and requirements.
Market Dynamics
• Growing installations of wind energy plants combined with the rapid reduction of fossil fuels will drive the demand for wind turbines, which will increase the demand for wind turbine casting market. Adding to this, Increase in spending on energy from government and increasing demand for electricity are the major drivers for the market growth globally.
• Favorable government policies like promoting the usage of renewable energy sources and the need for lowering carbon footprints and emissions are increasing worldwide.
• Huge investment is required for the manufacturing and installation of wind turbines is the major restraint hampering the growth of the market. Adding to this, the rising demand for energy from the Solar sector is the other significant factor hindering the market growth. Solar energy utilization rate has witnessed substantial growth over the past few years emerging as a potential threat to wind energy source.
Market Segmentation
• Based on the type, the wind turbine casting market is segmented into the horizontal axis and vertical axis. Horizontal axis wind turbines are the most common type of use worldwide. Horizontal axis turbine dominates the majority of the wind industry and expected to continue the same in the forecast period due to high efficiency and power output compared to Vertical axis type turbines. Companies are focusing to produce a different type of ranges in power for the horizontal axis. For instance, Aeolos Wind Energy produces 1kw, 2kw, 3kw, 5kw, 10kw, 20kw, 30kw, 50kw horizontal axis wind turbines. Company has launched Aeolos-H 30kw – Permanent Magnet & Gearless Wind Turbine System in July 2017.
• On the basis of application, wind turbine casting is segmented into onshore, offshore type and other. The offshore application is anticipated to emerge as the next fastest-growing segment owing to rising government supports and ambitious targets to developing the wind farms in the water bodies. The growing number of installations in offshore applications in countries, such as China, Japan, Germany, UK, Denmark, and the Netherlands is projected to drive market growth. For instance, There are currently c.5-6GW of offshore wind in the UK by 2019, with a further 4-5GW having secured development contracts.
• Most of the Companies are focusing to manufacture offshore wind turbines worldwide. For instance, In July 2019, General Electric finished manufacturing the first nacelle for its new 12-megawatt offshore wind turbine, known as the Haliade-X, as the company pushes to establish itself as an offshore market rival to Siemens Gamesa and MHI Vestas.
Geographical Analysis
• Global wind turbine castings market is segmented into five major regions including North America, Europe, Asia Pacific, South America, and the Middle East & Africa region. Asia Pacific is anticipated to be the largest market share owing to the growing demand for electricity due to rapid industrialization and urbanization in the region during the forecasted period. Moreover, the growing requirement of energy concerning population expansion is anticipated to fuel growth in the region.
• This region is anticipated to foresee the next highest significant growth owing to stringent environmental norms to reduce carbon footprints in the region. Also, the growing offshore installations, especially in countries such as the UK, Germany, Spain, Scotland and Sweden are expected to increase demand over the forecast period. For instance, In 2019, Scotland government has installed the biggest offshore wind farm and this is the fourth-largest wind farm on the planet.
Competitive Analysis
• Global wind turbine casting market is facing high competition within the industry as the companies are innovating their wind turbine technology to increase their efficiency. Some of the major players include Siemens Gamesa Renewable Energy, S.A., SEForge, Aeolos Wind Energy Limited, Vestas Wind Systems A/S, Sawtenergy, Goldwind, Enercon, Suzlon Energy Ltd, Global Spec, WIndside Production Ltd and MFG Wind.
• Global wind turbine casting market competitiveness is enhancing with the rising installations of new wind turbine power plants globally.
• For instance, on February 2019, Wind turbine maker Siemens Gamesa signed a USD 78.4 million contract with EPBiH to supply wind turbines for a 48-megawatt (MW) wind farm. Further, the company will supply 15 turbines and would build a wind park on Podvelezje plateau near the southern town of Mostar. It will also service the turbines for five years.
• February 2019, Siemens GA completed the casting the initial turbine blades for the second phase of the 120MW Formosa 1 phase 2 project located Taiwan off the coast In.
View full sample report: https://www.datamintelligence.com/research-report/wind-turbine-casting-market
Download free sample: https://www.datamintelligence.com/download-sample/wind-turbine-casting-market
About Us
DataM Intelligence was incorporated in the early weeks of 2017 as a Market Research and Consulting firm with just two people on board. Within a span of less than a year we have secured more than 100 unique customers from established organizations all over the world.
For more information:
Sai Kiran
Sales Manager at Data M Intelligence
Email: info@datamintelligence.com
Tel: +1 877 441 4866
Website: www.datamintelligence.com
Contact Information:
DataM Intelligence
Sai Kiran
Tel: +1 877 441 4866
Email us
----
This press release is posted on EmailWire.com -- a global newswire that provides Press Release Distribution Services with Guaranteed Results
DataM Intelligence
Sai Kiran
Tel: +1 877 441 4866
Email us
----
This press release is posted on EmailWire.com -- a global newswire that provides Press Release Distribution Services with Guaranteed Results